Connor's Instructable

I will be opening a gym in Salt Lake City Utah because it is a great city to open a new gym because there are many medium aged people that will benefit from a gym in their area. I will have all types of equipment that anyone can use and that will help everyone. I will have a variety of different rooms including yoga and a place for little kids to be in will parents can workout. This gym will also be a place where we can help bring you back to your best through rehabilitation. There will be two floors the first will have our yoga center, rehabilitation area, play place for kids, and some workout equipment. The second floor will have mainly running and exercise equipment. There will also be locker rooms for men and women on the first floor with bathrooms and storage.

First I had to know what people needed and wanted and what exactly I should have my gym offer. To do that I had to do a lot of research.

I watched a couple videos to know what was wanted in gym, I also looked up many things like what the most used machines at gyms were so I could have everything that people would want. I as well had to look up the best dimensions for gyms so I knew how big to make my gym so it wouldn't be too small. After all my research that took me to where I had to think of how to build the gym, or the brainstorming.

To start my brainstorming I jotted down some ideas of what I wanted the inside to look like and also wrote down my reasoning for why I wanted all the things in my gym. I made both floors and what exactly I wanted on each floor so I could easily move through the actual building phase. I made sure i had all the dimensions down that I wanted to use so I would't have to look anything up again or waste any time.

After I had done all of my brainstorming and knew what I wanted to do I started constructing my design using Tinker cad. I first started with a solid structure using my dimensions I had. Then I created each room so they were the right length for what was needed. I also created a second floor which was mainly for cardio.

I really liked this project and it really showed why the design process is so important when building things and creating different sculptures.It was also really fun to use Tinker Cad and create anything I could want in my gym.