Contemporary Jewelry Holder

Make a nice looking wall frame to hang jewelry.

All girls need a special place to hang their shiny things.

This is a simple project to save some counter space in the getting ready zone, and look fancy while doing it.

I had this old sheet of metal in a closet from a previous DIY project. It is very thin and lightweight but it has a nice design cut into it. I took careful measurements around the edges and started a simple drawing in illustrator. This could have been a straight rectangle frame but since I like rounded corners I added a little fillet to each inner corner. In addition to the frame I also added several rectangles that will be used later for hanging and attaching the metal.

Now that we have the frame designed I just imported the drawing into our laser cutter software. It only took a few minutes to cut this out. I used 1/8" plywood.

Glue up the wood and metal together and attach some magnets and hangers to the metal.

Hanging it on the wall is very simple, and you want to make this sturdy so it doesn't come off the wall. The gaps in the mesh are really nice to