Coven Charm

If you love American Horror Story like I do, you'll love this coven charm. I will be showing you how to make this easy Coven charm on AutoDesk.

Once you open AutoDesk create a new sketch using millimeters.

First, start by making a shape of a heart type figure as shown above. Each arch that is added to the heart is about 10 mm outward. The diameter is 76 millimeters and 67 millimeters height. Then extrude by 10 millimeter outward.

Sketch two parallel lines as shown above in the middle of the heart. Then extrude it by 3.5 mm outwards.

Use your creative skills and draw half a second heart with a ribbon.

Make sure your arches are connected to ensure it extrudes properly.

Do the same process as you did before to the bottom half of the heart.

Once your done extrude everything you've just drawn 3.5 millimeters outward.

After you have extruded your heart go back to sketch and apply the words to the center of the two parallel lines. You can either apply text and extrude it inwards, or do each letter individually. I have decided to do each letter individually.

Once your done sketching the letters extrude it inwards 10 millimeters

Once your done save your finished work and print out your charm!