Creating a Breather Line for Honda Civic 1999 Valve Cover.

Ever since I used a warm air intake in my car, the valve cover I let breathe via an independent air filter. In my quest for improved fuel economy, which is damn amazing thus far, I want the valve cover breathing via the engine air filter as per the original honda design.

Here is how I modified my spare cone filter to accept a breather line. The tools are;
-cone air filter.
-drill bits.
-cordless drill.
-clear pvc tubing 1/4inch OD.

Drilling a pilot hole followed by the final bit size, I made an entry at the base of the cone filter. I made sure to shake out all the metallic pieces from inside the cone.

I wanted the tube very snug into the hole to have an airtight seal.

I popped off the existing cone filter and fitted the modified one in its place. I also removed the air filter for the valve cover. Once the modified cone filter was installed I used a length of silicone tubing to join the pvc tubing to the valve cover.

I started the engine and it ran well! The idle rpm was a little higher from this modification and I'm very happy about that. Hopefully my fuel economy can improve a bit in time.