Cube Puzzle in Tinkercad

This is a cube puzzle made on Tinkercad in which you will have to assemble to the different shapes to make a cube.

1. A computer or a laptop
2. A browser (Firefox and Google Chrome recommended)
3. A notebook for rough ideas

1. To make the first shape first drag a cube on to the Workspace. Set it's Length to 60.00 , it's Width to 20.00 and it's Height to 20.00
2. Drag another cube on to the Workplane set it's Length to 40.00 , it's Width to 20.00 and it's Height to 20.00
3. Rotate the cube with Height 40.00 to 90 degrees
4. Then place the rotated cube on the edge of the other cube perfecty
5. Then the group the two cubes together
6. Set a color to it if you want to

1. Drag a cube on to the Workplane. Set it's Length to 40.00, it's Width to 20.00 and it's Height to 20.00
2. Duplicate the cube and rotate it to 90 degrees.
3. Place the duplicated cube on the edge of the other cube perfectly.
4. Group them Together.
5. Add a color to it .

1. Duplicate the 2 figure
2. Duplicate the 2 figure again
3. Rotate it to 90 degrees so that it is vertical
4. Align one side of the horizontal figure to the side of the vertical figure
5. Group them together
6. Add a color to it

1. Duplicate the Third figure
2. Add color to it

1. Duplicate the Second figure twice
2. You should get three Second figures
3. Rotate the first duplicate such that one of arms faces upward
4. Rotate the second duplicate such that one of its arms faces downward
5. Align the base of the first duplicate with the base of the second duplicate
6. Group them together
7. Add color to it

1. First drag a cube on the Workplane . Set it's Length to 60.00 , it's Width to 20.00 and it's Height to 20.00
2. Drag another cube on the Workplane . Set it's Length, Width and Height to 20.00( Mostly it's measures are always 20.00 by default)
3. Align the small box in the center of the cuboid an lift it up to the surface of the cuboid
4. Group them together
5. Add color to it

1. Duplicate the second figure
2. Add color to it

1. Drag a cube on the Workplane . Check it's measures it should be as follows it's Length should be 20.00 , it's Width should be 20.00 and it's Height should be 20.00
2. Add a color to it

1. Drag the fifth figure on the Workplane in the center
2. Drag the first figure to the side of the 5 figure
3. Drag the 6 figure to the other side of the 5 figure
4. Drag the 8 figure on top of the 6 figure
5. Drag the 2 figure on top of the 8 figure
6. Drag the 3 figure on top of the 1 figure( Ensure that the 3 figure touches the 2 figure)
7. Drag the 4 figure on top of the 1 figure but one of its arms should be below the 3 figure
8. Drag the 7 figure on top of the 6 figure
9. Awesome !!! the Cube is now ready

Yipee !! you just created your 3-D Cube Puzzle in Tinkercad