Cylinder Earrings

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

In this lesson you will learn how to create earrings using cylinder shapes. So let's get started!

1. Drag a Cylinder shape to the workplane.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it smaller to a height of 2mm.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it smaller to a diameter of 10mm.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Turn up the shapes by rotating it 90 degrees and move it to the area marked in orange.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Copy and paste the cylinder.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Move it to the area outlined in orange.
2. Don't forget you can zoom in and rotate your view to get a better look at the shapes.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Repeat the previous steps and copy paste 3 more cylinders.
2. Move them to the areas highlighted in orange.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Drag a letter O shape to the workplane.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Scale it smaller to a height of 2mm and size it to fit the area outlined in orange.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Rotate and move it to the marked spot.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

1. Select all the shapes and group them into a single shape by clicking the group button in the menu bar.

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

Congratulations! You made it!