D-Sub Test-Adapters (design Idea)

I often have to test instruments with D-Sub connectors for power and signals. Instead of soldering for each a new test-cable, I made a set of test-adapters presented here.

- Prototyping board RE224 for 9 and 15 pin connectors

- Prototyping board RE224 for 25 connectors Image 4

Both from Roth-Elektronik are available with SRBP-paper FR2 or Epoxy fibre-glass FR4 For Distributors see https://www.roth-elektronik.com/en/distributors

- Male and female D-Sub connectors for PCB 90 degree

- Male headers .1 inch pitch vertical and or horizontal as you wish

Divide the boards to get one for each type of connector.
Solder in the connectors and headers.

If needed, make solder bridges between the solder-eyes of the headers