DESK

Hi everyone, on this occasion we are going to make a desk with glass surface in Fusion 360 program. It's easy to make and doesn't need a lot of materials. I hope you can join me in the process and that the project is to your liking! :D

For the design of our desktop we need

-i5 or i7 computer

-Mouse as peripheral

-Fusion 360 software (I put the link to download it :))

-And a lot of desire to learn!

Our desktop design: D¡¡¡¡

First of all, we need to have our Fusion 360 program installed on our computer.

Now yes, we will start making the faces of our desktop, remember that the measures of all the faces will be like images.

SIDE A: We will open the program and create a folder in which we can put all our progress, to do this we will press the SAVE tool (located at the top) and select the option "new project" and we will name it desktop. Once saved, we will go to the tool CREATE SKETCH and press it, then we will click on one of the positioning sides that appear on the screen. Now we will press the option CREATE and select LINE, we will begin to make the face A , to make the lines we will press right click of our mouse and drag it, when we do this we can see that some measures appear, we can change them and give the corresponding measure. . Then we must press FINISH SOCKETTING (located at the top right). To give it a 3D effect we must select the CREATE tool and then look for the EXTRUDE option, the thickness of all the sides will be 9mm , if we want to give it appearance of glass, metal, plastic, etc. we can go to MODIFY and press the option "appearance", inside this option we can choose the appearance that we like and drag it to our SIDE A. To make this desktop I'll be using a coor oscruo that is inside "stained".that would be all for our side A.

Our Desktop Design (Part 2) :D !!!!

We will start making the faces of our desktop, remember that the measures of all the faces will be as images.

SIDE B: We will open the program and press the SAVE option, we will save it in the same file but we will change its name to Side B. Once saved, we will go to the CREATE SKECHT tool, then we will click on one of the positioning sides that appear on the screen. Now we will click on the option CREATE and select LINE, we will start making the B side, to make the lines we will click with the right button of our mouse and drag it , when we do this we can see that some measures appear, we can change them and give the corresponding measure. When we are half way to finish the B side. Then press FINISH SKETCH(located at the top right). To give it a 3D effect we must select the CREATE tool and then look for the EXTRUDE option, the thickness of all the sides will be 9mm, if we want to give it appearance of glass, metal, plastic, etc. we can go to MODIFY and press the option "appearance", inside this option we can choose the appearance that we like and drag it to our SIDE B and as in side A we will put the same appearance.

Designing Our Desktop (Part 3) :D¡¡¡¡¡

We will start making the faces of our desktop, remember that the measures of all the faces will be like images.

SIDE C: We will open the program and press the SAVE option, we will save it in the same file but we will change its name to Side C. Once saved, we will go to the CREATE SKECHT tool, then we will click on one of the positioning sides that appear on the screen. Now click on the CREATE option and select LINE. We will start making the C side, to make the lines we will press the right button of our mouse and drag it, when we do this we will be able to see that some measures appear, we can change them and give the corresponding measure. Then press FINISH SKETCH (located at the top right), to give it a 3D effect we must select the CREATE tool and then look for the EXTRACT option, the thickness of all the sides will be 9mm.If we want to give it the appearance of glass, metal, plastic, etc. we can go to MODIFY and click on the option "appearance", inside this option we can choose the appearance that we like and drag it to our SIDE C I suggest that this time choose a lighter color since this side will be a very important in the appearance of our desktop .

Designing Our Desktop (Part 4) :D¡¡¡¡¡

We will start making the faces of our desktop, remember that the measures of all the faces will be like images.

SIDE D: We will open the program and press the SAVE option, we will save it in the same file but we will change its name to SIDE D. Once saved, we will go to the CREATE SKECHT tool, then we will click on one of the positioning sides that appear on the screen. Now click on the CREATE option and select LINE.We will start making the D side, to make the lines we will press the right button of our mouse and drag it, when we do this we will be able to see that some measures appear, we can change them and give the corresponding measure. Then press FINISH SKETCH (located at the top right), to give it a 3D effect we must select the CREATE tool and then look for the EXTRACT option, the thickness of all sides will be 9mm. If we want to give it the appearance of glass, metal, plastic, etc. we can go to MODIFY and click on the option "appearance", inside this option we can choose the appearance that we like and drag it to our SIDE D. I suggest that this time choose a lighter color since this side will be a very important in the appearance of our desktop (BACK SIDE).

Designing Our Desktop (Part 5) :D¡¡¡¡¡

We will start making the faces of our desktop, remember that the measures of all the faces will be like images.

SIDE E: We will open the program and press the SAVE option, we will save it in the same file but we will change its name to Side E. Once saved, we will go to the CREATE SKECHT tool, then we will click on one of the positioning sides that appear on the screen. Now click on the CREATE option and select LINE.We will start making the E side, to make the lines we will press the right button of our mouse and drag it, when we do this we will be able to see that some measures appear, we can change them and give the corresponding measure. Then press FINISH SKETCH (located at the top right), to give it a 3D effect we must select the CREATE tool and then look for the EXTRACT option, the thickness of all sides will be 9mm. If we want to give it the appearance of glass, metal, plastic, etc. we can go to MODIFY and click on the option "appearance", inside this option we can choose the appearance that we like and drag it to our SIDE E , in this side the same as in the sides A and B we will choose a dark color .

We will start making the faces of our desktop, remember that the measures of all the faces will be like images.

SIDE F: We will open the program and press the SAVE option, we will save it in the same file but we will change its name to Side F. Once saved, we will go to the CREATE SKECHT tool, then we will click on one of the positioning sides that appear on the screen. Now click on the CREATE option and select LINE.We will start making the F side, to make the lines we will press the right button of our mouse and drag it, when we do this we will be able to see that some measures appear, we can change them and give the corresponding measure. Then press FINISH SKETCH (located at the top right), to give it a 3D effect we must select the CREATE tool and then look for the EXTRACT option, the thickness of this piece will be 10mm (this piece will form the surface of our desktop). If we want to give it the appearance of glass, metal, plastic, etc. we can go to MODIFY and click on the option "appearance", inside this option we can choose the appearance that we like and drag it to our SIDE F , in this case we will choose a glass appearance, to make it look more even with the colors of the desktop I decided to put a black color, but you can put the one you like.We can see that this piece has curves, to make the curves we must go to the TOOLS option there we will find a tool called FILLET, to use it we must select the sides where we want to form the curves and automatically that corner will become a curve, do not forget that at the end we will put FINISH SKETCH.

ASSEMBLY OF ALL SIDES :D ¡¡¡¡

The time has come to assemble the pieces of our desk ! !!!! There is almost nothing left to finish, I hope that so far everything has been understandable and fun for you. To assemble the pieces we must first open our file (in which are all the sides already worked). We must create a new folder and name it ASSEMBLY . On the left side should appear all the sides as this will make it easier for us to assemble, we will start with the SIDE A
and we will go inserting each one of the faces in alphabetical order (the images will clarify any doubts you may have). To insert the faces to our work file we must right click and press the option "Insert in current design"), what we will do now is to assemble all the sides. I hope you liked it a lot and had fun. Until next time¡¡¡¡ ♥♥♥♥♥