DIY 3D PRINTED VISE

Hello everyone i want to present one of my projects , 3d printed vise.

First download this files and print them.

Now that you have printed the files you need more:

1x M5 screw 70mm long

2x M5 washers

4x M5 nuts

Insert the M5 screw in the part 3.

Block the M5 screw with the M5 nut.

Insert the M5 nut in the part 2.

Insert the part 1 in the part 2.

Slide the part 1 to the left side.

Insert the M5 screw.

Insert the M5 nut.

Insert the M5 washer.

Insert the M5 screw in the part 1.

Insert the second washer.

Before to insert the nut in the part 1 put some glue on the nut thread. Insert the nut in the part 1 and wait for 5 minutes to stick.

Then on the other side of the part 1 put some glue this time on the screw.

Now tight the nut but leave a bit of play and wait another 5 minutes tu stick.

Congratulations you now have your own 3d printed vise.