DIY 3D PRINTER VERSION 2 CODE NAME 3D UNIVERS

This is how i will convert the first version of my 3d printer in to the second version.

At the beginning the idea was to build a cnc router.

Here was the finishing of the cnc router build.

Here is how i convert my cnc router in to a 3d printer.

Because the cnc router have making a lot of noise i decided to convert hem in to a 3d printer. This was the first version of my 3d printer witch i called 3D UNIVERS VERSION 1.

So i bought LM10UU linear ball bearings.

Shaft coupler 5mm to 8mm flexible coupling.

Anycubic ultrabase heated bed and glass plate.

M5 thread t nut for 3030 aluminium profiles.

Usongshine stepping motor 17HS4401S .

Magnetic print bed tape for 3d printers.

This is how i mount the magnetic bed tape.

This is the first print on the magnetic bed tape.

12v 30A 360W power supply

This is how i mounted the power supply.

I have printed bracket for 3030 aluminium profiles.

I have printed T slot L type for M5 screw for my diy 3d printer.

I have printed another type of brackets for 3030 aluminium profiles.

This is the mounting of 3030 aluminium extrusion profiles parts with T slot L type 90 degree connector brackets and 3030 corner angle brackets.

I designed an shaft support for 10 mm rod and 3030 aluminium extrusion profile.

Here is how i mounted the LM10UU bearings in the 3d printed bearing housing.