DIY Arduino Nano

How to make an Arduino Nano with a Attiny 85.

Shape your design to the PCB. I used 6cm by 2 cm.

I used Dremel but you can use whatever you want. Make sure to rub it well, so it will take a good shape

.

See the parts in the image!

Solder power to the Attiny and the pins however you like.

Solder the 3rd Capacitor Between Reset and Ground(on you diy arduino)

You can see how my turned out. Hope you like it and enjoy it. See at videos how to program it.See the fotos for more info.