DIY Banyan Tree on Wall

Material

Thermocol sheet,acrylic colors.

backer rod,artificial moss,

hedge panel,aluminium sheet ,

cardboard,pipe

In this video i tried to make DIY banyan tree on wall.For this project i used 9 inches by 18 inches thermocol sheet. I used metal brush for the edges of the thermocol. All the sides of the thermocol sheet should be rough. Now take cardboard sheet and mark lines on it 3 cm by 1.5 cm . Cut all the lines like bricks . Apply PVA glue on sheet and paste all the bricks like i did.

After prepared the wall ,color it. i used dark,light brown & orange acrylic color. Color all the bricks one by one, then i used light & dark acrylic color for the sides of the wall. I tried to use grey color for the old look of wall . Now i used spa green color in the center of the bricks .Artificial moss used in between the bricks.wall is ready.

For the roots of banyan i used different sizes of backer rod .Join all the rods like i did .For the shaped of real roots i made marks on backer with the help of soldering iron. For the color i applied raw sienna on it .

Take a piece of thermocol sheet & make the base of wall. Take grey color & cover the base. For main hole mark the size ,i drew design on aluminium sheet to make the main hole cover . I took rust brown color &apply on it.

I used wooden sticks & wire for it . Apply color on it & make it like old look . Fix it on the base.

Here is few finial pics of my project. If you like the video press thumbs up button , share , comment & subscribe.