DIY Cardboard House

by pranav2345 in Craft > Cardboard

3903 Views, 54 Favorites, 0 Comments

DIY Cardboard House

PicsArt_04-20-09.20.31.jpg
20200419_220800.jpg
20200419_220705.jpg
PicsArt_04-20-08.31.17.jpg
20200419_220800.jpg

Hi Everyone !

In this tutorial, i would tell you how can you create an awesome looking cardboard house just by using some old cardboard boxes and old school notebooks. Its a easy build and just requires about 5 hours to be completely build, you can scale it up or down along your imagination. So without wasting time lets start the build.

Gathering the Supplies

20200417_143219.jpg
20200417_171335.jpg
  • Cardboard Boxes - Random Sizes
  • Old notebook cardboard
  • Craft Knife
  • Ruler
  • Black Sheet of Paper
  • White A4 sheet Paper
  • Some paper Glue
  • Spray Paint (Optional)

Creating the Base Structure

20200417_170918.jpg
20200417_143515.jpg
20200417_144205.jpg
20200417_144232.jpg
20200417_145031.jpg
20200417_145135.jpg
20200417_150110.jpg
20200417_150301.jpg
20200417_150558.jpg
20200417_152547.jpg
20200417_152647.jpg
20200417_153051.jpg
20200417_153150.jpg
20200417_153324.jpg
20200417_153505.jpg
20200417_153620.jpg
20200417_153716.jpg
20200417_153823.jpg
20200417_154312.jpg
20200417_154317.jpg
20200417_170915.jpg

For creating the base, you just need to join the cardboard boxes roughly using glue. Remember it is the base of the project so its will make a rough outline of your final look.

For making the roof in a slanting manner (Skillon), I made small cuts (groove) in the boxes as you can see above.

Next i joined them together and you can see the final look. Actually its much easy. Just you your Imagination and create a rough outline of your castle or house.

Remember do not get confused if you do not have best sizes of the boxes that meets your requirements. Just use a bigger box and cut it down as I have done (It Actually Works)

Creating the Rooftop (Skillon)

20200417_175701.jpg
20200417_175739.jpg
20200417_175911.jpg
20200417_171335.jpg
20200417_171520.jpg
20200417_171528.jpg
20200417_171710.jpg
20200417_180606.jpg
20200417_171725.jpg
20200417_172847.jpg
20200417_174203.jpg
20200417_174808.jpg

Next i created small cutouts out of some box cardboard and I used them as a Base for my Skillon. make sure that you use a little bigger sized than of boxes as it looks wonderful after the build.

Spray Painting

20200418_210359.jpg
20200418_210517.jpg
20200418_210747.jpg
20200418_211146.jpg
20200418_210758.jpg

Next after previous steps were concluded i moved on to next part i.e- painting the structure in a dark colour. I used a dark blue coloured Paint that i had laying around and game my project a great dark look.

If you don't have a spray paint, you can always use a brush based paint to colour the whole part

Adding Door and Tiles

20200419_171355.jpg
20200420_075655.jpg
20200418_202628.jpg
20200418_213055.jpg
20200419_120409.jpg
20200418_213100.jpg
20200418_213645.jpg
20200418_214903.jpg
20200418_215210.jpg
20200418_215457.jpg
20200418_215840.jpg
20200418_220419.jpg
20200418_222347.jpg
20200418_224120.jpg
20200419_115923.jpg
20200419_124918.jpg
20200419_115722.jpg
20200419_125944.jpg
20200418_225307.jpg
20200418_230836.jpg

Now i gathered some old notebook cardboard which was completely white from inside and cut them into strips of around 1cm in width. Next i used them as tiles for my project and started covering the whole project in this manner (shown above)

Remember :- There should be small gaps between the tiles as shown as it creates a wonderful effect in the future

Next i created small square hole / groove for the door and added one as shown.

And you just need to cut out small outlines for the windows as shown.

Now I continued to tile all around the whole building, till everything was well covered. I know that its a little annoying job but it gets the work done. And at last it looks just amazing.

Tiling the Skillion

20200419_171455.jpg
20200419_171645.jpg
20200419_172147.jpg
20200419_172712.jpg
20200419_172714.jpg
20200419_173938.jpg
20200419_174346.jpg

Start by gathering some leftover pieces of cardboard and tear them into small random size as shown above.

Now just tile all over the skillon till you perfectly and completely cover it.

Repeat the same steps for all the rooftops and windows top and you will get a final gorgeous look.

Adding a Final Look

20200419_211812.jpg
20200419_205722.jpg
20200419_212218.jpg
20200419_215908.jpg
20200419_212536.jpg
20200419_220334.jpg
20200419_220836.jpg
20200419_220832.jpg
20200419_220520.jpg
20200419_220804.jpg

Now i created some window outlines using some black paper, I also created door outine and a door handle to give it a nicer look.

Next make small paper rools (4 in nos.) and use them as a support for barcading the roof space as shown.

Enjoy With the Build !

20200419_220708.jpg
20200419_220522.jpg
20200419_220712.jpg
20200419_220644.jpg
20200419_220657.jpg
20200419_220753.jpg
20200419_220755.jpg

Now the built is done. Now you can sitback and have a look on the gorgeous piece of art that you have build your own.

A very great thanks for giving your precious time for reading my instructables.

Thanks once again !!