DIY Lithophane Floating Lamp

From last few weeks we are seeing many posts about the Impossible Floating table. Using the same concept I have designed a Lithophane Floating Lamp. Lithophane Floating Lamp is a desk lamp,having the photos you desire to have on it. Its can be a best gift for your loved ones. The lamp has different color modes which can be triggered using a push button or a IR sensor.

• Arduino Nano(1)
• Pixel LED Strip(20 LEDs)
• Push Button Or IR sensor (1)
• Female DC power pin(1)
• 5V Adapter(1)
• 3D printing

• Go to https://lithophanemaker.com/
• Open Lithophane Lamp Maker Page.
• Choose the images you want to insert.
• Set all the dimension values as shown in image (as per my design).
• Login with your E-Mail ID and click on Create.stl.
• STL file will be downloaded.
• Link for floating table STL: https://drive.google.com/drive/folders/1TuedHUjSw...
• 3D Print the lithophane in super quality.
• 3D print the floating table.
• Make the floating table using wires instead of strings.

• You can choose the mode of triggering the lamp color modes either by push button or IR sensor.
• The code for both the option is same.
• Make all the connections as shown in circuit diagram.
• I have used WS2811 LEDs, I will recommend you to use any addressable LED Strip so that it can be more continent.

• Open the code in Arduino IDE: https://drive.google.com/drive/folders/1TuedHUjSwH...
• Make sure to install FastLED.h library in Arduino IDE.
• Connect your Arduino to PC and upload the code.

• Make sure to check all the functions of circuit after uploading the code.
• Assemble everything together using glue.
• That's it Lamp is ready.
• Use a 5V adapter to power the lamp.