DIY Looped Scarf

Tools:
Scissors

Materials:                                                            
T-shirt


NOTE: Any t-shirt style or material will do to make this scarf; however, a plain, cotton tee with no side seams works best.

Cut the trunk of the t-shirt horizontally, making 11 to 16 strips (depending on the size shirt), each about one inch wide.
             (NOTE: Don’t worry too much about cutting straight lines as long as the strips are about even with one another.)

Discard the bottom hem and upper portion of the shirt.

Stretch each of the strips taught, attempting to make them roughly the same length, and set aside two.

Collect the remaining pieces and double them onto themselves.

Cut one of the held-back pieces so that it is no longer a loop.

Use the cut piece to tie a firm knot around the body of the scarf.

Begin to loop the tie around a 3 to 4 inch section of the scarf, covering the knot itself, and tie off the end in another knot. 

Repeat the tying process (steps 5 through 7) on the opposite side of the body of the scarf using the second held-back piece.

Use your scissors to tuck the exposed knots under the tied sections. 

Enjoy your new scarf!