DIY MOD LEAD IBANEZ GUITAR.

This is an mod of my custom lead guitar with parts from Ibanez guitars. I decided to make this out of scrap from a friend of mine Emmanuel Hillsong Igwe. Thanks to you for your support in this project.

Parts I got and their prices from Aliexpress.

Humbucker Pickups:-

http://www.aliexpress.com/store/product/Double-Coi...

Single Pickup:-

https://www.aliexpress.com/item/Single-Coil-Pickup...

Tremolo System:-

https://ru.aliexpress.com/item/High-Quality-Black-...

500kohms potentiometer 2pcs:-

https://www.aliexpress.com/item/New-arrival-1-2-5-...

Capacitor:-

https://ru.aliexpress.com/item/100pcs-Mylar-Film-C...

5-way switch:-

www.aliexpress.com%2Fstore%2Fproduct%2FVintage-5-w...

Unscrew every part and take out bad electronics. Prepare wooden body and neck/fretboard for work.

Spray body to your desired need of design. That which suits you. i just used the colour i had laying around.

This is based on individual desire. How you want your fretboard to look like.

Assemble all body parts together to begin assembling of pickups,electonics, etc.

Wire all pickups and other electronics to desired.

i used the above/below schematic.

Finally a very tasky part. Be careful when fixing string so as not to break any string especially the 1st E string cause its the thinnest.

The guitar on its first run