DIY MacBook / Laptop Wood Support

If you want to build a DIY MacBook Pro Wood Support, you can see this tuto. You can find sketchup plans at the end of this Instructables.

You can see in the plans, the sizes for the lines, and the drawing part.

I draw the Two parts in the same wood plank.

After Drawing, you need to use a Jigsaw to cut the two parts.

You need to cut 3 Wood battens at the right size ( 210 mm )

After your cuts, you need to assemble the 5 parts like in the picture, with screw and a screw driver.

After the assembly, i used a special shade oil for my wood.

After a few hours of waiting (only if you used a shade oil, or other), you can take your DIY LapTop Wood Support !

Enjoy !

If you need, you can download the Sketchup file to read/write/transform as you want.