DIY Macro Len for $2 in 2 Mins - With Video Instruction
by tycoyoken in Circuits > Gadgets
30351 Views, 41 Favorites, 0 Comments
DIY Macro Len for $2 in 2 Mins - With Video Instruction
This is known as the cheapest, way to DIY a macro lens for less than 2 bucks, I recently bought a O2 pocket PC phone, however, this model unable to take close up image....it made me very sad. When I do a research, I found out almost 80% of the mobile phones in the market do not support macro mode.
I usually use it to capture bar codes, words from newpaper magazine, name card, products and small object....if you like this video...kindly held to vote me higher...thank you and enjoy the movie...
There are all you will need:
1) Blu Tack (very little), about $0.1 buck
2) A pair of Presbyopia glass(must use 250 to 275 degrees) get one at 1 dollar Shop
3) 1 piece of pipe ring form any DIY shop, about $0.1 buck
Instruction:
all you need to do is blu tack....just watch my video instruction
I usually use it to capture bar codes, words from newpaper magazine, name card, products and small object....if you like this video...kindly held to vote me higher...thank you and enjoy the movie...
There are all you will need:
1) Blu Tack (very little), about $0.1 buck
2) A pair of Presbyopia glass(must use 250 to 275 degrees) get one at 1 dollar Shop
3) 1 piece of pipe ring form any DIY shop, about $0.1 buck
Instruction:
all you need to do is blu tack....just watch my video instruction
Tools We Need
1) Blu Tack (very little), about $0.1 buck
2) A pair of Presbyopia glass(must use 250 to 275 degrees) get one at 1 dollar Shop
3) 1 piece of pipe ring form any DIY shop, about $0.1 buck
Remove the Lens
you will need 2 lens from the glass
Add Blu Tack
attach some blu tack on the ring (front and back)
Add Blu Tack on Lens
add some blu tack in between the lens (left and right), don't block the center
Attach Them on the Camera
attach them on the camera
More Samples Pictures
here is my samples pictures