DIY Modern Coffee Table

by EthanF1 in Workshop > Furniture

3865 Views, 75 Favorites, 0 Comments

DIY Modern Coffee Table

image-8.jpeg

Materials:Cable ties (zip-ties),35 3/4"×24" acrylic sheet (.080), 35 3/4"×24" wire deck, 22"×23 1/2" wire decks

image-5.jpeg
image-2.jpeg

Lay the 35 3/4"×24" wire deck flat with the 35 3/4" raised crossbars facing down (when turned over they will face up). Then attach an 22"×23 1/2" wire deck to each end of the larger wire deck with cable ties. Make sure to leave the cable ties loosely secured.

image-1.jpeg
image-4.jpeg

Attach the other two 22"×23 1/2" wire decks to the center of the larger wire deck with cable ties. Make sure the ties go around all three pieces. Leave the ties fairly loose for later.

image-7.jpeg
image-10.jpeg
image-13.jpeg

Join each of the two middle 22"×23 1/2" wire deck pieces to the outer 22"×23 1/2" wire deck pieces with cable ties, to form a "V" shape as shown.

image-11.jpeg

Adjust all pieces so they line up neatly. Tighten the ties and trim the ends and then flip the whole piece over.

image-9.jpeg

Set the acrylic sheets on the wire deck with the sanded side facing down. They should sit between the 30" raised crossbars.

Optional: Spray paint the cable ties silver to blend in more with the wire decks.Drill small holes in each corner of the acrylic sheet for a small cable tie, to hold it in place on the table top.