DIY PVC Backdrop

This PVC Backdrop is perfect to pull out for any event. I recently used this for a Valentine Banquet, and now it's being used for my friends wedding! When we were setting it up I got a few pictures and I'd love to show you all how to make one as well.

2 - 8' PVC

2 - 4' PVC

2 - 3' PVC

4 - 2' PVC

2 - 1' PVC

2 - Elbow Fittings

4 - T-connecters

Connect 2', T-connector, and 1' pipe together. Repeat.

Now use your 4' piece and place them into the last opening of the T. Repeat on other side.

Now place another T piece on top of the 4' piece with the open end facing inward. Repeat on other side. Then place your 8' piece in between your two T connectors.

Now get your 3' piece and place an L bracket on one end, place the other end on top of the T bracket. Repeat on other side.

Now, use your remaining 8' piece and put it at the top using the L brackets. (Step stool recommended)

Before you place your last 8' piece on top be sure to put some curtains on it as well as any kind of decoration you want for you event!

Don't forget the final touch! We used Ivy to make this back drop look breathtaking! But you can use any kind of greenery etc. that you want!

In the 'Supplies' step, there are two pipes that I 'X'ed out, I used those pipes to stabilize my frame a little more, this step is optional.