DIY Pencil Case

You will need :

- Printer and downloadable template

- PVC plastic sheet

- Scissors

- Stanley knife

- Prit Stick

- Superglue

Print out the pdf of our template and glue to the plastic sheet (PVC) using a prit stick

Use your scissors to cut out the outside black lines on the template

Using the stanley knife, score the inside black lines on the plastic. Don't apply too much pressure or it will cut through the plastic.

Fold over the scored edges

Glue together the 4 small tabs to the edges. Be careful not to snap the tabs of when doing this. You're done!!