DIY Ruffle Dress

by anghelmariana88 in Craft > Fashion

345 Views, 1 Favorites, 0 Comments

DIY Ruffle Dress

DSC07012.JPG

I made a midi loose fit dress with raglan balloon sleeve with a twist lace insertion and ruffles. At the neck has elastic inserted , so you can wear it also on your shoulders. This dress can be made in a variety of fabrics such as polyester or cotton and you can accessorize it with a belt.


Supplies

  • 3 to 5 meters of fabric
  • elastic 2 cm wide
  • 2 meters of lace
  • thread
  • sewing machine
  • scissor
  • some pins
  • iron
  • serger machine- optional

20210911_162058.jpg

Take the bodice front ruffle and fold it in half. Sew at 1 cm from the edge with the longest stitch length of your machine so you can make the ruffle by pulling one thread.

20210911_144111.jpg
20210911_144118.jpg

Take the bodice front ruffle and sew it on the bodice front ruffle. You have to hold underneath the 1 cm edge and sew

20210911_155910.jpg

Take the bodice front panel and bodice back panel pin them together (right sides facing in) and sew along the edge

20210911_162058.jpg

Take the sleeve ruffles and fold it in half. Sew at 1 cm from the edge with the

longest stitch length of your machine so you can make the ruffle by pulling one thread.

20210911_162351.jpg

Take the top part sleeve panel and the top part sleeve ruffle and sew it together

20210912_102633.jpg

Take the Sleeve bottom part and the sleeve bottom ruffle and sew it together

20210912_113931.jpg
20210912_113935.jpg

Take the middle sleeve panel (lace panel) and place it on top of the edges and sew along the edge

20210913_194311.jpg

Sew the sleeve close- (right sides facing in) and repeat the process for the other sleeve

20210913_194311.jpg

Sew the sleeves to the bodice

20210914_092625.jpg

To make the elastic channel along the top of the entire bodice piece and sleeves, measure 4 cm from the top neckline and fold inside of the dress,with 1 cm folded inside. of the channel so you can have a clean edge.

Leave an opening to thread in a piece of elastic that's slightly shorter than the length around your shoulders.

Close the opening

20210914_214700.jpg

Finish the edge of the sleeve with an overcasting machine and make the channel for the

elastic of 2 cm leaving an opening to insert the elastic, which can be slightly looser than

your wrist measurement.

Close the opening and repeat the process for the other sleeve.

20210912_173405.jpg
  • Take the Front panel ruffle and the back panel ruffle and sew them together (right sides facing in)
  • Sew at 1 cm from the edge with the longest stitch length of your machine so you can gather the ruffle by pulling one thread.
  • Sew the ruffle to the bodice - right sides facing in
  • Make the hem

If you want to make this dress you can find my PDF pattern on my etsy shop https://www.etsy.com/shop/MaryTheDressmaker?ref=profile_header