DIY Swim Top

by shelby_barton in Craft > Fashion

7712 Views, 29 Favorites, 0 Comments

DIY Swim Top

IMG_20140610_184556.jpg

By: Shelby Barton

Materials

IMG_20140610_141426.jpg

Materials:
1 bra 1/2 yard or 1 yard of material Sewing machine/ Thread Reynolds Freezer Paper

Trace & Cut

IMG_20140610_141309.jpg

Trace and outline each cup on to the freezer paper. Then you want to cut out what you just traced.

When you cut keep in mind that need to allow for about a 1/4" extra margin of material to be able to fold over and sew onto the bra.

Cut Out the Material

IMG_20140610_140739.jpg

Place the outline that you just cut out over your material then cut out the material to the shape.

Side Straps

IMG_20140610_151045.jpg
IMG_20140610_155509.jpg

Now you need to outline and cut out the side straps that go around your sides and hook in back.

Once you get these cut out then you can pin it to the cut out that you did for the pads. Once you have the two ends pinned together than you can sew along and connect them together.

Pin and Sew

IMG_20140610_141752.jpg

Now that you have the material cut out for the bra you need to take the
material and pin it to the top edge of each pad with the inside of the material (the side that you do not want to show when you are all done) facing out. That way when you are done sewing along the top of the bra you can flip the material over and the right side will be showing on the outside of the bra.

Connecting Material to Bra

IMG_20140610_151552.jpg
IMG_20140610_173528.jpg

Once you flip the material over (right-side out) then you can pin the rest of the material to the bra and then sew the material onto the bra.

Final - Swim Top

IMG_20140610_184556.jpg

Once you have completely sewn all the material onto the bra, you have your end product. Your own, personalized swim top! Easy peasy (: