DIY Tablet Case

I made a case for the new tablet of my mom, from an old hardcover notebook. The only materials you need are:

- Old hardcover notebook. But you can make it with hard cardboard (about 2 o 3 mm)

- glue

- black fabric (drill)

- scissors

- thread

First, I take the paper-pad off,and take the bright laminated off from the cover. The cover was cut to get 15 x 24 cm, and the spine about 1 cm.

I cut a piece of frabic about 24 x 34 cm.

With my sewing machine I make an embroidery, just for decor.

Spread glue on the card board and paste over the fabric, cut the corner, and paste the excess over the other side of the cardboard.

Cut a cardboard frame about 12 x 21 cm and cover it with fabric, the excess is used for join the frame with the cover, it is glue between the cover and a piece of fabric.

That's all.