DIY Tin Can Meat Smoker

by homemadestuff in Outside > Fire

2315 Views, 6 Favorites, 0 Comments

DIY Tin Can Meat Smoker

IMG_0328.JPG
IMG_0331.JPG
IMG_0330.JPG
IMG_0334.JPG
IMG_0332.JPG
IMG_0335.JPG
IMG_0337.JPG
IMG_0338.JPG
IMG_0339.JPG
  1. Trace the small can close to the bottom on the side.
  2. With tin cutters cut out where you traced.
  3. Use a hammer and nail to poke 4/5 the way around (the leftover 1/5 will be the hinge to the door).
  4. Poke 3 holes in the top of the large can.
  5. Put small can through the hole in the large can (door facing out).
  6. Bend the clothes hanger into a kind of table thing with an X on top (as shone) this will be your rack.
  7. Now your DIY Tin can meat smoker is complete!
  8. How to use...
  9. Place meat on the wire rack.
  10. Start a fire in the small tin can.
  11. Keep the fire going until the meat is done.

Supplies

1: A 15.5 oz (small) tin can

2: A 34.5 oz (large) tin can

3: A old wire clothes hanger