DIY Tutorial - How to Make Enamel Sterling Silver Pendant Earrings

Tools and Materials:

Sterling silver, Water, Hammer, Texture hammer, Scissors, Lighter, Saponification solution, Enamel powder, Kiln – heating, Tweezers, Enamel sieve, Earring accessories

Draw a mark on the silver piece, and clip the marking line along the silver piece with the scissors.

According to the size of the silver trimmed in the previous step, draw a mark(a little bigger than first silver piece) on the silver piece, and clip the marking line along the silver piece with the scissors.

Heat the silver piece to soften it and cool it with cold water to prevent burns.

Choose the texture hammer you want, hammer on the silver piece to leave the beautiful textures.

Choose the texture hammer you want, hammer on the silver piece to leave the beautiful textures.

At the top of the silver piece (total 4pieces), a small hole will be drilled with a hammer drill. Then we use the scissors to trim the silver piece, because the cutting position is relatively sharp and we will use tools to make it smooth.

Heat up the liquid soap and boil the silver pendant inside the liquid soap till it is blackened. Then we will take the silver pendant out of the liquid soap and use sandpaper to process polishing.

Put the brass piece on the tweezers and then put some enamel powder into the powder sieve. The powder sieve will be above the brass and we will slightly pour out the powder to make sure the enamel powder is evenly fallen onto the brass.

Baking: Put the brass piece onto the baking rack and then slightly put it into the oven. The temperature will be set as 200℃ and bake it for 1 minutes.

Assemble the earring hook and silver earring pendant.

In this video, making a pair enamel Sterling Silver Pendant Earrings. Hope you would like it!

Facebook: HappyJewelrySupplies

Instagram: HappyJewelrySupplies

Our Website: www.happyjewelrysupplies.com