DIY Tutorial-How to Make a Resin Bracelet With Gold Foil!

by HappyJewelrySupplies in Craft > Jewelry

4135 Views, 38 Favorites, 0 Comments

DIY Tutorial-How to Make a Resin Bracelet With Gold Foil!

DIY Tutorial-How to Make a Resin Bracelet with Gold Foil!
1.png
Tools and Materials:
  • Resin glue
  • Foil
  • Bracelet mold
  • Color (Black & White)
  • Tools

Decorative Bracelet Mold

2.png
Pick a few silica gel models of different styles and put gold foil, silver foil and rose-gold foil into the both sides of the mold. Decorate the models and obtain the different metal patterns.

To Prepare the Resin Glue

3.png
4.png
5.png
Prepare some resin glue. Mix up A glue and B glue according to the proportion of 3:1. Usually we will use two different cups to contain A glue and B glue individually according to the proportion. Mix up the two glues completely and stir it evenly.

Wait

6.png
6-1.png
The glue after stirring up has a lot of bubbles. Now we need to put it away for a while for the bubbles to disappear.

Add Color!

7.png
7-1.png
The made up resin glue needs to be separated into two. One of them will be added in with white pigment and the other one will be added in with black pigment. Stir them evenly for the color to be mixed completely.

Placed Height Difference

8.png
Place the silicone bracelet models as the image shows and give the models a high and low drop.

Pouring the White Color Resin Glue Into the Bracelet Mold(the Lower Side)

9.png
9-1.png
On the low side of the models, we will pour in the white resin glue slowly.

Pouring the Black Color Resin Glue Into the Bracelet Mold(the Higher Side)

9-2.png
9-3.png
On the high side of the models, we will pour in the black resin glue slowly. Then we will put all the models on a same level. Now we see there are two kinds of resin glues of different colors inside the models.

Dry Off

10.png
11.png
11-1.png
Place it for 12 hours for the resin glue to dry up. Now take the finished bracelet out of the model.

Polished

12.png
12-1.png
Carefully polish the sharp incision of the bracelet till it is smooth.

Complete

13.png
5-12AB胶手镯-1.jpg
  • This DIY Tutorial, including how to make the Black and White Gradient with Gold Foil Resin Bracelet! Hope you will like it!
  • Follow us on Instagram or Facebook, you can know more details about us!
  • Facebook: HappyJewelrySupplies
  • Instagram: HappyJewelrySupplies
Our Website + Etsy online shop:
----------------------------------------------------
Products covered by the video:
Resin Bangle Mold :
Foil Paper: