DIY Ultrasonic Radar

Hello world, This time I'm going to make ultrasonic radar from Arduino nano and HC-SR04. I'm using arduino nano because I want to make my project compact.

We need:-

HARDWARE

1)Arduino nano

2)Breadboard

3)Some jumper wires

4)HC-SR04 ultrasonic sensor

5) A micro servo motor

SOFTWARE

1)Arduino IDE

2)Processing 3

Connections are very simple. I will use a breadboard for easiness.

Connect VCC & GND of Servo & Ultrasonic sensor to 5v & GND of arduino nano respectively.

Connect Echo of ultrasonic sensor to D10.

Connect Trig of ultrasonic sensor to D11.

Signal pin of servo to D12.

See schematics for clear understanding..........

Proggraming of this project divides into 2 sections.

1) ARDUINO IDE.

2) PROCESSING 3.

I've attach both codes with this step.

I've uploaded a video of this project with full tutorial. You can see my video on my youtube channel.

I'm basically a student but I've a keen interest in making stuffs like this. I have also made a channel "Ohm's lab" but I have very very very few subscribers......19 only.

I need your support. Please SUBSCRIBE my channel.

Share my channel to all hobbyist like you. Please support my channel by just clicking on SUBSCRIBE button.

Channel link: https://www.youtube.com/channel/UCUganwBnDfbmkHykjnypX3A