DIY Wire Wrapped Gemstone Ring

A few weeks ago my best friend gave me a bunch of leftover beads and stones, well... to me those were treasures! Among all the beads and stones these 2 oval-shaped gemstones caught my eyes. I had to use them to make something nice... so I kept thinking. Finally, the idea hit me, wrapping the stones with wire and of course swirls!

Follow this tutorial and find out how easily I made these rings.

To make these gemstone rings you'll need:

1. Oval shaped gemstone,
2. Craft wire,
3. Jewelry pliers,
4. Mandrel.

Take a long piece of wire (20 inches or more, this would actually depend on your ring size).

Wrap the wire around the mandrel 2 times from 1 size larger than the actual ring size. Keep equal amount of wire on both sides after wrapping.

Now coil both sides of the wire in a counter clockwise motion to create the base.

Use flat nose pliers to flatten the base, so that the stone stays perfectly on it.

Then, coil the wires 2-3 times around the ring band, on both sides of the base.

Place the stone on the base and firmly hold it with your fingers to keep it still.

Take any one side of the wire and wrap the gemstone from the middle as shown in the second picture.

After wrapping the stone 2-3 times, create a swirly pattern with the rest of the wire. Trim extra wire if needed. Keep the wraps and swirl loose, do not tighten them. Similarly, wrap and create a swirl on the other side.

Swirls are awesome! I loved how the ring turned out. I hope you'll enjoy making it! I have another tutorial on making stone pendants. Please do check that tutorial if you wanna learn more techniques of wire wrapping stones.

Thank You :)