DIY Breadboard Power Supply

In this project I´m making an 5v and 12v power supply for the Radioshack breadboard. his

The parts I used for this project is:

* 5v to 12v step up

* Wires

* Small project box

* 4 male pins

* PCB

* Breadboard

* 4x battery holder / USB cable

My 5-12v step up did not fit in the box I have so I had to cut off the wire connectors and solder the wires to the board instead of screwing them to it.

Solder two male headers to an 2x2 PCB and than the + and - cable to the pins, do that to both cables.

Make two holes one one side of the box and one on the other side, the holes have to be big inouf for the cables.

Take 6 wires and solder 4 to the input and 2 to the output.

Screw the two input wires to + and - on the breadboard connectors, and connect 5v to the red and black connectors.

THANKS FOR WATCHING

iIIf you have any questions please ask in the comments and share a photo if you make it :)