DIY Carbon Tape Heated Gloves V1.0
by Shenzhen in Workshop > Motorcycles
62103 Views, 124 Favorites, 0 Comments
DIY Carbon Tape Heated Gloves V1.0
diy heated clothing kit
I bought a carbon heating flex tape from www.carbonheater.us (or on Amazon) and sewed it into an ordinary insulated fleece gloves.
For every glove I used 150 cm of carbon. It powered by 12 V. Current is about 1,5A for each one.
New glove (on the left) has 3 layers (on the right).
Tape sewed by hands on the inner side of glove . Connected in parallel 2 x 75 cm.
Because of tape is thin and very soft I placed it directly to fingertips side.
Because of tape is thin and very soft I placed it directly to fingertips side.
You can sew wire to carbon tape to make a good and flexible connection. The contact place shouldn't be hotter then the tape itself. If not you must increase the contact area.
Now carbon tape placed between two gloves.
