DIY Geometric Necklace Pendant

by lindsaykujawa in Craft > Jewelry

12776 Views, 185 Favorites, 0 Comments

DIY Geometric Necklace Pendant

IMGblog_9325.jpg
Make your own geometric pendant using polymer clay!

Supplies Needed

IMGblog_9264.jpg
What you will need:

    3 different colors of polymer clay
    Some kind of roller (a large marker will also do the trick)
    Razor blade
    Cotton cord
    Krazy glue
    Toothpick or object to poke a hole in clay

Soften and Condition Clay

Picnik collage1.jpg
Soften and condition the clay with your hands before starting. Use the roller to roll out a small flat piece. Do this with each color.

Slice Triangles

IMG_9278.JPG
Carefully slice out 3 triangles. You are going to make the first one the largest and the two following smaller.

Bake the Clay Triangles

IMG_9287.JPG
Poke a hole in the smallest of the 3 triangles. Place the triangles on a baking sheet and bake at 275 for 20 minutes.

Krazy Glue the Triangles Together

Picnik collage.jpg
Krazy glue the triangles on top of each other, staggering them a little bit.

Wear!

IMG_blog9322.jpg
Attach the necklace cord and have fun wearing! You can get creative and add more triangles and of course the color combinations are endless.