DIY Tin Can Knife Sheath Made With Ducttape

This instructable is a follow up on the "DIY Knife Made Of Soda Cans" because people where saying that they where getting cut by it.

Ducttape, scissors, knife, and a ruler

Use your knife as a guide and wrap the duct tape around it backwards. Make sure this layer is thick

Cover most of the sheath in ducttape (stickey side down) except for the tip

Put some more ducttape on the tip, stickey side out, cut it, fold it down and cover it. Then cut a slot on the side where the blunt side of the knife will go.

cut a piece of ducttape roughly 6 inches Long and fold it down until you have a strip. Then sukure it onto the sheath.

Find the tin can knife project and other cool projects at jamesW113 on the instructables app or website. Favorite, vote, comment, and subscribe! :)