How to Make Deadshot Armor 2.0

Tools
·Utility Knife
·Wood Burning Pen
·Heat Gun
·Pen
·Pencil
·Hands

Materials
·Eva Foam Floor Mats
·6mm Eva Foam
·Contact Cement
·Straps And Buckles
·Black And Silver Paint

Step 1: Draw teplates on cardboard and cut them out
Step 2: Trace the templates on to Eva foam and cut them out
Step 3: Uut in the details with a exacto knife
Step 4: Use a woodburning pen to burn in the rivet shapes
Step 5: Use a heat gun to warm up the pieces and bends them to shape with your hands
Step 5: Use contact cement to glue the pieces together

Step 1: Draw teplates on cardboard and cut them out
Step 2: Trace the templates on to Eva foam and cut them out
Step 3: Uut in the details with a exacto knife
Step 4: Use a woodburning pen to burn in the rivet shapes
Step 5: Use a heat gun to warm up the pieces and bends them to shape with your hands
Step 5: Use contact cement to glue the pieces together

Step 1: Draw the templates on paper and cut them out
Step 2: Trace the templates on Eva foam and cut them out
Step 3: Use a heat gun to form the pieces
Step 4: Glue the pieces together with contact cement

Step 1: Draw the templates on paper and cut them out
Step 2: Trace the templates on Eva foam and cut them out
Step 3: Glue the pieces together with contact cement

First paint it with three coats of black Plastidip, than use silver and red paint for the details and for battle damage.

Using contact cement attach 1 inch straps and buckles to the armor in different places to hold the pieces together on your body