Decorate Christmas Tree With Papercraft

by Mr AbAk in Living > Christmas

3619 Views, 47 Favorites, 0 Comments

Decorate Christmas Tree With Papercraft

DSC00782.JPG
DSC00600.JPG
ornament-snowman_thm.jpg
DSC00761.JPG
DSC00760.JPG
DSC00775.JPG
DSC00778.JPG
DSC00733.JPG
DSC00745.JPG

Hello Guys we are back with some paper crafts for you to decorate your Christmas tree..

We have made these from hard photo paper and you can use anything you like....

We have Made 2 Beautiful Santas And 2 Cute Snowmans...

We Have Got This idea from small santa decorative used in decorating Christmas Tree....

So we decided to make them from paper craft.....

You can download these paper crafts below...

Snowman Parts

Snowman Instructions

Santa Parts

Santa Instructions

DISCLAIMER
This disclaimer is a legal notice covering the injuries caused while working on this instructable. Do at your own risk and Do not play with tools.

So Here's a bunch of materials you need for this 'ible...

Materials Required...

DSC00684.JPG
DSC00685.JPG

For Printing... you will need-

  • A Printer
  • Good Quality Photo paper (A-4 Size)
  • Attached PDFs

For making the paper crafts... you will need-

  • A Pair of Scissors
  • Printed Parts
  • Cello Tape
  • Glue
  • Hobby Knife

That's all You Need....

After having these materials go to the next step...

Santa:Cutting...

DSC00686.JPG
DSC00687.JPG
DSC00688.JPG
DSC00689.JPG
DSC00690.JPG
DSC00691.JPG
DSC00692.JPG
DSC00693.JPG

After Printing all the parts on the recommended A-4 photo paper...

Cut all the parts of the Santa pdf and then fold all the necessary folds...

There are in total Twelve parts for the Santa Decorative...

Make sure that you haven't missed out any part...

use the hobby knife to cut the holes marked with pink outline and also cut the necessary pink lines...

Use the images or the instructions pdf for the help...

Don't forget to cut the sharp triangles which are needed for sticking the base and the hook to the Santa...

Be careful while cutting the belt and the moustache or nose not to cut them half...

If you have used normal a-4 size sheet then the hook needs special care...

After cutting these just go to the next step for assembly instructions...

Santa:Assembly...

DSC00601.JPG
DSC00602.JPG
DSC00603.JPG
DSC00604.JPG
DSC00605.JPG
DSC00606.JPG
DSC00607.JPG
DSC00608.JPG
DSC00609.JPG
DSC00610.JPG
DSC00611.JPG
DSC00612.JPG
DSC00613.JPG
DSC00614.JPG
DSC00730.JPG
DSC00694.JPG
DSC00695.JPG
DSC00698.JPG
DSC00697.JPG
DSC00699.JPG
DSC00700.JPG
DSC00701.JPG
DSC00702.JPG
DSC00703.JPG
DSC00704.JPG
DSC00705.JPG
DSC00706.JPG
DSC00707.JPG
DSC00708.JPG
DSC00709.JPG
DSC00710.JPG
DSC00711.JPG
DSC00712.JPG
DSC00713.JPG
DSC00714.JPG
DSC00715.JPG

Start assembling the Santa...

First make a cone with the Santa triangle...

And then add the belt to it...

Fold the hands and place the hands so that the mountain fold comes to the front side...

Then place the beard of the Santa from the center towards the sides...

This will help you to maintain the symmetry...

Then add the cap of the Santa... and then it's white strip from the one side towards the another side...

then place the moustache with nose to the Santa...

Now stick the Santa to the base and to the hook...

So your Santa Decorative is ready and just follow the next steps for the snowman...

Snowman:Cutting...

DSC00716.JPG
DSC00717.JPG
DSC00719.JPG
DSC00718.JPG
DSC00720.JPG
DSC00721.JPG
DSC00722.JPG
DSC00723.JPG
DSC00724.JPG
DSC00725.JPG
DSC00726.JPG
DSC00727.JPG
DSC00728.JPG

After Printing all the parts on the recommended A-4 photo paper...

Cut all the parts of the Snowman pdf and then fold all the necessary folds...

There are in total Eleven parts for the Snowman Decorative...

Make sure that you haven't missed out any part...

use the hobby knife to cut the holes marked with pink outline and also cut the necessary pink lines...

Use the images or the instructions pdf for the help...

Don't forget to cut the sharp hexagons which are needed for sticking the base and the hook to the Snowman...

Be careful while cutting the body and the hat or scarf not to cut them half...

If you have used normal a-4 size sheet then the hook needs special care...

After cutting these just go to the next step for assembly instructions...

Snowman:Assembly...

DSC00615.JPG
DSC00617.JPG
DSC00618.JPG
DSC00619.JPG
DSC00620.JPG
DSC00621.JPG
DSC00622.JPG
DSC00623.JPG
DSC00624.JPG
DSC00625.JPG
DSC00626.JPG
DSC00627.JPG
DSC00628.JPG
DSC00629.JPG
DSC00631.JPG
DSC00630.JPG
DSC00738.JPG
DSC00739.JPG
DSC00740.JPG
DSC00773.JPG
DSC00772.JPG
DSC00741.JPG
DSC00742.JPG
DSC00743.JPG
DSC00744.JPG
DSC00748.JPG
DSC00747.JPG
DSC00750.JPG
DSC00755.JPG
DSC00756.JPG
DSC00757.JPG
DSC00758.JPG
DSC00759.JPG

Start assembling the snowman from it's base body....

By making the corners and edges clear and stiff...

Then make and place the middle body and stick it to the lower body with the the glue tabs inside the lower body...

And then make the head and then place it on the top and glue it in a similar way...

Now attach the base to the lower body...

And then attach 4th part to the head so that the glue tabs are on upside....

Now make the hat by using all remaining parts except part no.-11

In the part no.5 make valley folds at the bottom and mountain folds at the top for the hat....

Now stick the part4 and 6 together...

So now take the Part no-11 and make a mountain fold....

Now the place the scarf around the neck of the Snowman....

From the right side make a loop by 2 mountain folds and then just swing in the left side....to make a knot..

This completes your Snowman...

Finish...

DSC00776.JPG
DSC00777.JPG
DSC00779.JPG
DSC00780.JPG
DSC00781.JPG
DSC00774.JPG
DSC00737.JPG
DSC00736.JPG
DSC00762.JPG
DSC00731.JPG
DSC00729.JPG
DSC00734.JPG
DSC00735.JPG

We have finished these now so you can decorate your Christmas tree...

or just use them on your shelves or wall racks for beautifying this Christmas with these cool and jingled paper crafts...

Please vote us if you like our Instructable...

Here

Merry Christmas ...Thanks