🌸Denim Crop Top🌸

by TheCraftingArtist in Craft > Fashion

394 Views, 6 Favorites, 0 Comments

🌸Denim Crop Top🌸

Denim Crop Top.mp.png
F276RX1KVXTLESC.jpeg
IMG_20211113_105712276.jpg
IMG_20211113_105626154.jpg

We all have a pair of old jeans stuffed somewhere in our closet, me included! In this simple tutorial, I will show you how to repurpose those jeans into a denim crop top. Let's get started!

Supplies

IMG_20211106_155931595.jpg

old jeans

sewing machine

7 inch zipper (ngl I got mine from Walmart)

thread

pins

measuring tape

scissors

basic sewing knowledge


just a heads up; I only use a running stitch in this tutorial

Measurements

IMG_20211113_113432259.jpg

These are all of the measurements you will need. When I reference each letter in future steps feel free to check back here to look over which measurement is required.


a: measure from your under arm across you bust to your other underarm.

b: measure from the lowest point in the sweetheart neckline (where do you want it to lay) to the waist

c: measure from the highest point in the sweetheart neckline to the waist

d: waist measurement

e: measure from your underarm across your back to your other underarm.

Cutting the Pieces

IMG_20211106_164531929.jpg
IMG_20211106_165342128.jpg
IMG_20211106_171858430_BURST000_COVER_TOP.jpg

Divide measurement a by 2, this will be our front piece bust measurement. Divide d by 4, this will be our front piece waist measurement. On a leg of the jeans, sketch out our new bust measurement, waist measurement, c, and d. Draw lines to connect the measurements. Make room for seam allowance. Take e measurement. Divide this in half, it will be the width of your back piece. Make 2.

Sewing

FQ7I6U4KVXTLFHS.jpeg
IMG_20211107_125116652.jpg
IMG_20211113_135004129.jpg
IMG_20211113_134837881-2.jpg

Sew the front pieces together and sew the back pieces to the fronts. (Shown in picture 1). Hem the top of the denim garment. Add a zipper to the back. Personally I liked the frayed look on the bottom of the crop top, so I stitched 1/2 inches above the raw edge to keep it from fraying.

The Finale

IMG_20211113_105656681.jpg
IMG_20211113_105820015.jpg

That's the end of the tutorial, a lot shorter than some of my other instructables I must say! I hope it was fun to follow along and make sure to ask any questions!