Design and Assemble a Wheelchair Lever Arm: Planetary Gear

by issylapearson in Workshop > 3D Printing

343 Views, 0 Favorites, 0 Comments

Design and Assemble a Wheelchair Lever Arm: Planetary Gear

5.7.png

Instructions on how to build part of the wheelchair lever arm in solidworks for this project:

https://www.instructables.com/id/Design-and-Assemb...

Sketch a 17mm Diameter Circle on the Front Plane

5.1.png

Create a Vertical Centerline at the Top of the Circle, Draw Half of a Tooth and Use "Mirror Entities" to Mirror About the Centerline

5.2.png

5.3.png

Use "Circular Pattern" to Create 21 Identical Teeth Around the Gear and Use "trim Entities" to Trim the Circle

5.4.png

Extrude the Gear by 4mm Using "Extrude Boss"

5.5.png

Use "Hole Wizard" to Create and M2 Counterbore Hole in the Center of the Gear

5.6.png

5.7.png

History Tree

Design Tree.png