Desktop Phone Stand

This Instructable will show you how to 3D print your very own desktop phone stand!

The supplies that you'll need are a 3d printer and some sort of plastic filament that works with it.

Download the attached file and import it into the slicing software of your choice. I recommend using PrusaSlicer or Ultimaker Cura.

Supports are needed

At least 30% Infill

Raft/Brim is not necessary

It should like similar to the screenshot above once sliced.

Download the finished gcode file from the slicer and put it on a USB drive or SD card to insert in your printer and start printing.

Once you're finished, carefully remove the supports (and rafts if you have them).

Now you have a stand for your phone and there are even charging holes to keep your phone alive!