DiY Computer CPU Case With LED

So I got a loads of cardboard Boxes lying around and there came the treat. Instructables made a contest called CARDBOARD....The best Contest that Suits me...So my PC CPU was Lacking a Side cover and got fond with the pics from net of Transparent CPU cases....So I decided To Make one

Cardboard

Glue Gun or Glue

Transparent paper like a plastic (OHP sheet)

Scissors

Ruler

Pen

Paint ( red For me )

First Make a design in a paper or in the paint of

1- How much area should be cut of

2- place where transparent sheet should be pasted

Cut a Big Cardboard Piece so that it fits your PC.

Make The Rectangle using ruler and pen and cut it off here i marked the pic with Pixlr.

It should Be neat I left a little area in the right for Support.

I painted It with spray Paint Bought from a local stationery store...You Can use other paints also ...I applied about 3 coats of spray paint.

Now its Time to paste The Transparent Sheet onto the cardboard...I used glue gun to make it more simple

So there were some Numerous LED decorating lights were scattered over here (i think its from christmas)

i removed the upper cover of it to make it slim...

Check out the photo how I placed it inside the CPU...

So i put the Cardboard top over the cpu and turned the lights....It was so good than I expected....

So try It yourself and sorry if there is any Mistakes...