Diaper Hero--Arm for Astro Robot

This arm allows Astro robot to grasp a diaper (or trash) and deposit the unwanted item in a receptacle.

Power for the system is supplied by a "usb c to usb b" cable plugged into Astro (usb c end) and the Arduino Uno (usb b end). The reset button on the Arduino is used to activate the gripper. The gripper, servo motor and Parallax ultrasonic sensor round out the major parts required.

When I need to dispose of a diaper, I ask Astro to "come here" and Astro will find me. Ask Astro to turn left and the robot will present the gripper. Depress the reset button on the Arduino--the gripper will close (to indicate that the button was pushed), then open for five seconds. During the five second delay, place the unwanted item in a position to be squeezed by the gripper. Tell Astro to go to the charger. When Astro backs into the charger, the ultrasonic sensor will detect the wall and release the diaper into the trash can. Special thanks go to my wife, Annelle, for assistance in the video production as well as creation of the "super cape."

Astro robot is available from Amazon.com (sort of--by invitation)