Dice Tire Caps

An easy and inexpensive way to add some style to your bike tires and to get rid of some gameless dice lyng around.

The best side of the die to drill the hole in is the 1. The dot acts as a starting point for your hole.

Using your drill and a 3/8" drill bit (or a bit that is the same width of the existing cap) and make a hole 3/4 through the die.

Add a small amount of super glue into the freshly drilled hole.

Take the existing tire cap off your bike.

Put the existing tire cap into the glue filled hole.

After the glue has dried and the cap fits nicely, screw it back on your bike.