Disk Break Clock

This is a cool and easy project if you struggle to follow these step just say in the comment section.

First you will need a clock just any old clock don't use a decent clock you just want the workings out of it e.g hands and battery pack bit.

Just find any old disc break and give it a clean and if you want to paint it

Ok let's go
You will need to have a small screw driver or flat head depends what clock you've got. Check the back of the clock and see if there is a screw there should be but if not just gently lift the glass on the front of the clock with the flat head.

Gently ease the hands off with your finger and get a piece of duck tape and number them so you no the order they go back on so you just have this

Now carefully glue the black power pack to the back of the disk break
(Optional)
you can get a piece off wood and cut it to fix the disc break in with hot glue and you want paint the hands and give them a pop and them your done.