Dispensador De Alcohol En Gel - PC1

Hello dear friends of instructable, on this occasion we will make a gel dispenser, we will desing with the program Autodesk Fusion 360, i will teach you how to make every face. Goodbye

1. Laptop

2. Program instructable

3. Program Autodesk Fusion 360

4. Internet

1. As you see in the images they have to go zigzag 28, 3, 28, 3 successively.

2. You can also apply Mirror to select the lines to repeat and finally select the line to the center of the base and give it ok.

3. The co-lor of your preference in Modify.

1. As you in the images they have to go zigzag 28, 3, 28, 3 successively.

2. You can also apply Mirror to select the lines to repeat and finally select the line to the center of the base and give it ok.

3. Create two circles with a diameter of 3mm.

4. Cut in the middle as in the 20mm image.

5. The color of your preference in Modify.

1. This step is the easiest.

2. As you in the images they have to go zigzag 24, 3, 24, 3 successively.

3. The color of your preference in Modify.

1. Make a circle with a diameter of 25 mm.

2. You can also apply Mirror to select the circle to repeat and finally select the line in the center of the base and give it ok.

3. Use Fillet for corner curves.

4. Make a circle with a diameter of 3mm.

5. The color of your preference in Modify.

1. Put clik on face A, clik on insert into curret design.

2. The put on asemmble and joint.

3. Clik on the middle sides you want to join.

4. Do the same with all sides.

1. Put clik on face D, clik on insert into curret design.

2. Clik on the middle sides you want to join.

3. Do the same with all sides.

4. We will have our assembly.

1. We´re looking for an image in Google.

2. Clik on insert, clik in canvas.

3. Clik on create, clik in spline.

4. Draw above the inserted image.

1. Download software and laser machine manuals.

2. Enter the image into the application.

3. Min power 40, Max power 60.

4. Clik in the computer image.

1. Clik in simulation.

2. Seeing the weather.

3. That´s all for the simulation.