Diy Motion Sensing Led (super Easy)

by parvgupta001 in Circuits > LEDs

1684 Views, 19 Favorites, 0 Comments

Diy Motion Sensing Led (super Easy)

LED LIGHT HACK(motion sensing)

it is so easy to make and do not require any microcontroller for it thus no programming required no hassle just simly plug and play

YOU CAN CHECK OUT THE VIDEO FOR A DETAILED View

Grab Em All

led bulb
relay 5v
5v cellphone charger
transistor-bc547
diode-1n4007
resistance-470 ohm
box
bottle caps
pir sensor

Why I Decided to Make One

try it yourself

Lets Start

break open the charger to get the circuit without damaging the circuit

Cut Off the Bulb Plug

carefully cut off the bulb from bottom without damaging its wires and then snap out the wires

Make Holes in the Container

using lighter to heat up and make holes
then sand off the rough edges

SOLDERING Time

be careful while doing this

Circuit Diagram

check this out very carefully and precisely before starting

Solder All According to the Circuit Diagram

you can make a lot of changes but i advice you to discuss them in the comments below

Rough Up the Surface

for a better glue grip

Glue Up Everything

i used glue gun
its upto you what you want to use to glue it all together

Box Em Up

fit everything in the box

Attach the Pir Sensor (motion Sensor)

and you are ready to go

Thanks for Watching--youtube-parv Gupta

you may like some of my other projects, don't forget to check all of em