DoDoBloxy - Blocks for Kids. Fast 3D Printing.

DoDoBloxy - for vase printing. Fast and easy printing. They do not require additional processing.
I made blocks for my children.

- Printed in vase mode. They do not require supports.
- Printing on a 3D printer takes from 30 to 70 minutes depending on the model.
- Large format (the largest block 150x50x50 mm)
- Printing with additional partition walls to strengthen the blocks.
- Drain holes for easy cleaning in water.
- Smooth prints that do not require additional processing.
- High performance. With 1 kg of PLA, 100 cubes 50x50x50mm.

Place the blocks on the slicer as shown in the photos.

nozzle: 0.8
Vase mode (with "Smooth spiral contours" turned off)
Layer height: 0.3
Initial layer height: 0.3
Bottom layers: 3