Doctor Doom Hood

Hello. I thought you might like a little insight into my method for making a Doctor Doom Hood. This method is cheap, fast and totally for beginners. Obviously, there are endless ways you could alter this to suit your needs. This is just one method I used and I was super happy with the results. Enjoy!!!

Start by laying out your fabric and folding it in the middle. To fit my large head I used the measurements 15"x20". Cut out the basic shape of the hood with a rounded top corner that follows the natural curve of your head. Next, with your hood turned inside out, hem the outer edges and sew the back edge closed. NOTE: I don't have a sewing machine so I just used fabric glue and it worked great.

Now your hood is finished, let's work on the chest/shoulder piece.

Same as with the hood, lay your fabric out (don't fold this time) and cut out the chest piece to the size you want. In my case I went with 55"x18" because I didn't want a long runner going down my back. Next, hem the outside edges and fold your strip in half to make a 9"x55" scarf. NOTE: I did not sew the outer edges together, but you totally could if you wanted to.

Now just drape the chest piece over the hood across your shoulders (like a backwards scarf). You can pin it to your shirt or just let it hang over you. Your call.

For the chain in the front, I used two round cardboard box tops I found at a craft store and painted them gold. I then put 2 pieces of .25" craft foam inside and glued broach pins to the back. After that, I drilled holes for the chain and crimped the links with pliers.

Next, just pin the medallions to the front of your cloak and you're done!!! I like this method because you can wear the hood up or down and it's cool looking and comfortable.