Dog Toys for Heavy Chewers
![SQ_KNOT_DOG_TOY [800x600] (116).JPG](/proxy/?url=https://content.instructables.com/FAF/N5YN/G7DYKUC9/FAFN5YNG7DYKUC9.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (116).JPG)
![SQ_KNOT_DOG_TOY [800x600] (91).JPG](/proxy/?url=https://content.instructables.com/FXM/7A0N/G7DYQ0DS/FXM7A0NG7DYQ0DS.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (91).JPG)
These easy to make colorful rope toys are great for any size dog. Just scale up or down the diameter of the rope to fit your dog, 1/4" for small dogs or 3/8" for large dogs. Directions given are for a basic toss/tug toy pictured below. Pictured are several variations based on the basic knot that can be created with a little practice and creativity.
Finding Center of Two Lengths of Rope
![SQ_KNOT_DOG_TOY [800x600] (5).JPG](/proxy/?url=https://content.instructables.com/FQC/F580/G7DYKUCX/FQCF580G7DYKUCX.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (5).JPG)
Start with two equal lengths of rope, I recommend no shorter than 5' each length. Find the middle of each length by folding the rope in half and lining up the cut ends.
Finding Middle of Each Rope
![SQ_KNOT_DOG_TOY [800x600] (6).JPG](/proxy/?url=https://content.instructables.com/FM7/VU4H/G7DYKUDF/FM7VU4HG7DYKUDF.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (6).JPG)
![SQ_KNOT_DOG_TOY [800x600] (7).JPG](/proxy/?url=https://content.instructables.com/F3N/VCT3/G7DYKUDE/F3NVCT3G7DYKUDE.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (7).JPG)
After locating the middle of each rope, cross each rope at right angle to other rope.
Secure With Small Zip Tie
![SQ_KNOT_DOG_TOY [800x600] (7).JPG](/proxy/?url=https://content.instructables.com/F3N/VCT3/G7DYKUDE/F3NVCT3G7DYKUDE.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (7).JPG)
Then use a small zip tie to secure to the two lengths together at the centers.
Begin the Knot
![SQ_KNOT_DOG_TOY [800x600] (10).JPG](/proxy/?url=https://content.instructables.com/FBB/ITCT/G7DYQ0I4/FBBITCTG7DYQ0I4.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (10).JPG)
Lay crossed ropes over fisted hand with thumb extended.
Loop Around Thumb
![SQ_KNOT_DOG_TOY [800x600] (11).JPG](/proxy/?url=https://content.instructables.com/FFJ/K6BV/G7DYQ0JC/FFJK6BVG7DYQ0JC.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (11).JPG)
![SQ_KNOT_DOG_TOY [800x600] (12).JPG](/proxy/?url=https://content.instructables.com/FS9/TD0Q/G7DYQ0KH/FS9TD0QG7DYQ0KH.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (12).JPG)
![SQ_KNOT_DOG_TOY [800x600] (13).JPG](/proxy/?url=https://content.instructables.com/FX4/1NS7/G7DYQ0KO/FX41NS7G7DYQ0KO.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (13).JPG)
![SQ_KNOT_DOG_TOY [800x600] (14).JPG](/proxy/?url=https://content.instructables.com/F4L/IY3E/G7DYQ0LV/F4LIY3EG7DYQ0LV.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (14).JPG)
![SQ_KNOT_DOG_TOY [800x600] (15).JPG](/proxy/?url=https://content.instructables.com/FMO/FRTK/G7DYQ0NN/FMOFRTKG7DYQ0NN.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (15).JPG)
![SQ_KNOT_DOG_TOY [800x600] (16).JPG](/proxy/?url=https://content.instructables.com/F61/UCHZ/G7DYQ0PS/F61UCHZG7DYQ0PS.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (16).JPG)
![SQ_KNOT_DOG_TOY [800x600] (17).JPG](/proxy/?url=https://content.instructables.com/FEE/NGMN/G7DYQ0RL/FEENGMNG7DYQ0RL.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (17).JPG)
![SQ_KNOT_DOG_TOY [800x600] (19).JPG](/proxy/?url=https://content.instructables.com/FAG/N6LK/G7DYQ0SD/FAGN6LKG7DYQ0SD.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (19).JPG)
Loop first rope around thumb and over second rope, using thumb to hold first rope in place (see image)
Loop Second Rope
![SQ_KNOT_DOG_TOY [800x600] (12).JPG](/proxy/?url=https://content.instructables.com/FS9/TD0Q/G7DYQ0KH/FS9TD0QG7DYQ0KH.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (12).JPG)
Loop second rope over first rope and go over rope three, using thumb to hold in place.
Loop Third Rope
![SQ_KNOT_DOG_TOY [800x600] (13).JPG](/proxy/?url=https://content.instructables.com/FX4/1NS7/G7DYQ0KO/FX41NS7G7DYQ0KO.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (13).JPG)
Loop third rope over second rope and go over forth rope, use thumb to hold third rope in place.
Loop Fourth Rope
![SQ_KNOT_DOG_TOY [800x600] (14).JPG](/proxy/?url=https://content.instructables.com/F4L/IY3E/G7DYQ0LV/F4LIY3EG7DYQ0LV.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (14).JPG)
![SQ_KNOT_DOG_TOY [800x600] (15).JPG](/proxy/?url=https://content.instructables.com/FMO/FRTK/G7DYQ0NN/FMOFRTKG7DYQ0NN.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (15).JPG)
Loop fourth rope over third rope and then insert fourth rope into loop created by first rope.
Tighten Up Loops
![SQ_KNOT_DOG_TOY [800x600] (16).JPG](/proxy/?url=https://content.instructables.com/F61/UCHZ/G7DYQ0PS/F61UCHZG7DYQ0PS.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (16).JPG)
Tighten each rope by pulling the tail of each rope.
Continue to Tighten Loops
![SQ_KNOT_DOG_TOY [800x600] (17).JPG](/proxy/?url=https://content.instructables.com/FEE/NGMN/G7DYQ0RL/FEENGMNG7DYQ0RL.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (17).JPG)
Pull all ropes tight until a small four section knot is created.
Trim Off Zip Tie
![SQ_KNOT_DOG_TOY [800x600] (19).JPG](/proxy/?url=https://content.instructables.com/FAG/N6LK/G7DYQ0SD/FAGN6LKG7DYQ0SD.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (19).JPG)
Trim off zip tie tail, and place knot with zip tie side facing up.
Repeat Steps 5-9
![SQ_KNOT_DOG_TOY [800x600] (21).JPG](/proxy/?url=https://content.instructables.com/FRD/7MHK/G7DYQ157/FRD7MHKG7DYQ157.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (21).JPG)
Repeat steps 5-9. Loop first rope around thumb and over second rope.
Repeat Steps 5-9
![SQ_KNOT_DOG_TOY [800x600] (22).JPG](/proxy/?url=https://content.instructables.com/F6K/LION/G7DYQ15I/F6KLIONG7DYQ15I.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (22).JPG)
Repeat steps 5-9. Loop second rope over first rope and over third rope holding in place with thumb.
Repeat Steps 5-9
![SQ_KNOT_DOG_TOY [800x600] (23).JPG](/proxy/?url=https://content.instructables.com/FW1/RTX6/G7DYQ15V/FW1RTX6G7DYQ15V.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (23).JPG)
Repeat steps 5-9. Loop third rope over second rope and over fourth rope holding in place with thumb.
Repeat Steps 5-9
![SQ_KNOT_DOG_TOY [800x600] (24).JPG](/proxy/?url=https://content.instructables.com/FOW/KN3N/G7DYQ171/FOWKN3NG7DYQ171.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (24).JPG)
Repeat steps 5-9. Loop fourth rope over third rope and feed tail of fourth rope into loop created by first rope.
Tighten Up All Ropes
![SQ_KNOT_DOG_TOY [800x600] (25).JPG](/proxy/?url=https://content.instructables.com/FK3/DG99/G7DYYUP7/FK3DG99G7DYYUP7.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (25).JPG)
![SQ_KNOT_DOG_TOY [800x600] (26).JPG](/proxy/?url=https://content.instructables.com/FED/TYJH/G7DYYUPB/FEDTYJHG7DYYUPB.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (26).JPG)
Continue to tighten up all ropes pulling together to form a four section tight knot.
Tightened Knot
![SQ_KNOT_DOG_TOY [800x600] (27).JPG](/proxy/?url=https://content.instructables.com/FA4/2IHJ/G7DYYUPV/FA42IHJG7DYYUPV.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (27).JPG)
![SQ_KNOT_DOG_TOY [800x600] (28).JPG](/proxy/?url=https://content.instructables.com/FJR/BR03/G7DYYUPY/FJRBR03G7DYYUPY.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (28).JPG)
Tightened knot shown here from above and side view.
Repeat Steps 5 Thru 9
![SQ_KNOT_DOG_TOY [800x600] (29).JPG](/proxy/?url=https://content.instructables.com/FBM/5SQB/G7DYYUQC/FBM5SQBG7DYYUQC.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (29).JPG)
![SQ_KNOT_DOG_TOY [800x600] (30).JPG](/proxy/?url=https://content.instructables.com/F4F/QEFR/G7DYYUQI/F4FQEFRG7DYYUQI.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (30).JPG)
![SQ_KNOT_DOG_TOY [800x600] (31).JPG](/proxy/?url=https://content.instructables.com/F0V/P7ZA/G7DYYUQN/F0VP7ZAG7DYYUQN.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (31).JPG)
![SQ_KNOT_DOG_TOY [800x600] (32).JPG](/proxy/?url=https://content.instructables.com/FQQ/81HX/G7DYYUQS/FQQ81HXG7DYYUQS.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (32).JPG)
![SQ_KNOT_DOG_TOY [800x600] (33).JPG](/proxy/?url=https://content.instructables.com/FAT/ESYF/G7DYYUR4/FATESYFG7DYYUR4.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (33).JPG)
![SQ_KNOT_DOG_TOY [800x600] (34).JPG](/proxy/?url=https://content.instructables.com/FF7/G22V/G7DYYURB/FF7G22VG7DYYURB.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (34).JPG)
5. Loop first rope around thumb & across the top of the second rope .
6. Loop second rope around first rope & across the top of the third rope .
7. Loop third rope around second rope & across the top of the fourth rope .
8. Loop fourth rope around third rope & insert tail end of fourth rope into loop made with first rope .
6. Loop second rope around first rope & across the top of the third rope .
7. Loop third rope around second rope & across the top of the fourth rope .
8. Loop fourth rope around third rope & insert tail end of fourth rope into loop made with first rope .
9. Tigthen up all ropes until a tight four section knot appears
Repeat until only short lengths of each rope remain
Repeat Steps 5 Thru 9 Until Only Short Lengths of Rope Remain
![SQ_KNOT_DOG_TOY [800x600] (74).JPG](/proxy/?url=https://content.instructables.com/FYV/W7BH/G7DYYV4N/FYVW7BHG7DYYV4N.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (74).JPG)
![SQ_KNOT_DOG_TOY [800x600] (69).JPG](/proxy/?url=https://content.instructables.com/F46/HJFM/G7DYYV4W/F46HJFMG7DYYV4W.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (69).JPG)
Repeat steps 5 thru 9 until only short lengths of rope remain
Tucking in Tails & Finishing Off
![SQ_KNOT_DOG_TOY [800x600] (75).JPG](/proxy/?url=https://content.instructables.com/FQ4/9CXJ/G7DY7O0Z/FQ49CXJG7DY7O0Z.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (75).JPG)
![SQ_KNOT_DOG_TOY [800x600] (77).JPG](/proxy/?url=https://content.instructables.com/FY6/IOCX/G7DY7O1A/FY6IOCXG7DY7O1A.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (77).JPG)
![SQ_KNOT_DOG_TOY [800x600] (78).JPG](/proxy/?url=https://content.instructables.com/FUP/DSML/G7DY7O1G/FUPDSMLG7DY7O1G.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (78).JPG)
Insert hemostats or needle nose pliers into knot grabbing one
rope tail and pulling it threw knot.
rope tail and pulling it threw knot.
Continue Pulling Rope Tails Threw Knot
![SQ_KNOT_DOG_TOY [800x600] (83).JPG](/proxy/?url=https://content.instructables.com/F09/7V2L/G7DY7O2B/F097V2LG7DY7O2B.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (83).JPG)
Continue pulling rope tails threw knot.
Trim Back All Rope Tails
![SQ_KNOT_DOG_TOY [800x600] (84).JPG](/proxy/?url=https://content.instructables.com/FDQ/DPJM/G7DY7O3S/FDQDPJMG7DY7O3S.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (84).JPG)
Trim back all rope tails
Trim Away Center Core of Rope
![SQ_KNOT_DOG_TOY [800x600] (86).JPG](/proxy/?url=https://content.instructables.com/FG6/MICM/G7DY7O4L/FG6MICMG7DY7O4L.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (86).JPG)
Push back outside braided cover & to expose central core and trim away to reveal leaving only the outer nylon cover
Melt the Exposed Nylon Rope and Push Back With Side of Lighter
![SQ_KNOT_DOG_TOY [800x600] (87).JPG](/proxy/?url=https://content.instructables.com/F44/SEZB/G7DY7O7B/F44SEZBG7DY7O7B.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (87).JPG)
Melt the exposed nylon rope and push back with side of lighter
Finished Dog Toy
![SQ_KNOT_DOG_TOY [800x600] (91).JPG](/proxy/?url=https://content.instructables.com/FO2/S9SY/G7DY7O7Y/FO2S9SYG7DY7O7Y.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (91).JPG)
![SQ_KNOT_DOG_TOY [800x600] (95).JPG](/proxy/?url=https://content.instructables.com/FJU/S5R8/G7DY7O81/FJUS5R8G7DY7O81.jpg&filename=SQ_KNOT_DOG_TOY [800x600] (95).JPG)
Finished Dog Toy. From two 5' lengths of rope the finished toy will be 6" - 7".