Dollar Orami Eagle

by Thorondor95 in Craft > Paper

2482 Views, 4 Favorites, 0 Comments

Dollar Orami Eagle

DSCN1178.JPG

This is an origami eagle folded from a dollar bill. It is fairly complicated, so be sure to start with a practice bill instead of a genuine $1 currency. Also, since dollar bills can be thick and wrinkled, make sure to fold sharply in both directions, creating a very loose hinge. Follow the pictures in order with the steps.

1-8

DSCN1123.JPG
DSCN1124.JPG
DSCN1126.JPG
DSCN1127.JPG
DSCN1128.JPG
DSCN1129.JPG
DSCN1130.JPG
DSCN1131.JPG

1. Start with a dollar bill or practice bill.

2. Fold in half.

3. Result.

4. Align each edge with the fold.

5. Unfold on the halfway crease.

6. Bisect each flap.

7. Flip over.

8. Fold each of the flaps on top along the edge.

9-16

DSCN1132.JPG
DSCN1133.JPG
DSCN1134.JPG
DSCN1135.JPG
DSCN1136.JPG
DSCN1137.JPG
DSCN1138.JPG
DSCN1139.JPG

9. Flip over.

10. Align the creases to the edge.

11. Fold from the intersection to the point.

12. Rabbit-ear fold.

13. Fold up the flaps as far as they will go.

14. Unfold.

15. Prepare to rabbit-ear fold.

16. Rabbit-ear fold.

17-24

DSCN1140.JPG
DSCN1141.JPG
DSCN1142.JPG
DSCN1143.JPG
DSCN1144.JPG
DSCN1145.JPG
DSCN1146.JPG
DSCN1147.JPG

17. Flatten.

18. Result.

19. Fold down the flap as far as it will go.

20. Fold an angle bisector as shown. The model will not be flat anymore, so be gentle.

21. Result.

22. Fold the flaps back up.

23. CAREFULLY fold the edges to the center crease as shown.

24. Bisect these angles.

25-31

DSCN1148.JPG
DSCN1149.JPG
DSCN1150.JPG
DSCN1151.JPG
DSCN1152.JPG
DSCN1153.JPG
DSCN1154.JPG
DSCN1155.JPG

25. Fold the whole kaboodle in half.

26. Inside reverse fold on existing creases.

27. Pay attention to these creases and use them as guides for the next step.

28. Crimp fold along the guidelines shown.

29. Fold the flaps down.

30. Fold a bisector as shown to squash-fold the wing.

31. Results.

32-37

DSCN1156.JPG
DSCN1157.JPG
DSCN1158.JPG
DSCN1159.JPG
DSCN1160.JPG
DSCN1161.JPG
DSCN1162.JPG
DSCN1163.JPG

32. Fold another bisector as shown, essentially repeating the step in the opposite direction.

33. Results.

34. Tuck everything into the slot in the wing.

35. Close-up of the slot.

36. Repeat on the other side.

37. Fold the flap back up.

38-43

DSCN1164.JPG
DSCN1165.JPG
DSCN1166.JPG
DSCN1167.JPG
DSCN1168.JPG
DSCN1169.JPG
DSCN1170.JPG
DSCN1171.JPG

38. Unfold.

39. Make the two folds shown here.

40. The next step is tricky and confusing, so take your time and follow the pictures.

41. The finished tail.

42. Fold in half, but make sure to reposition the tail as shown.

43. Carefully narrow the tail as shown.

39-Finish

DSCN1172.JPG
DSCN1173.JPG
DSCN1174.JPG
DSCN1175.JPG
DSCN1176.JPG
DSCN1177.JPG
DSCN1179.JPG
DSCN1180.JPG

39. The final steps are to add details such as the beak, claws, and proper body shape.

All done! You now have a beautiful dollar origami eagle! Thank you for your patience with this model (and my teaching skills), I know it's a lot of work, but it diffidently pays off!