Double Cross Single Rainbow Loom Bracelet

This pattern is really easy I think. It basically just repeats itself. Its a little bit thicker than the single rainbow loom bracelet.
You'll need
• rainbow loom (or any other loom)
• rubber bands
• a hook
• C-clip or S-clip
(You might want to have it in a straight position)
*This isn't my design. It was created by TutorialsByA™ on YouTube. (-:

Start by twisting your rubber band into a figure 8 across 2 pegs, like shown.

Then do the same with another rubber band except place it oppositely on the other one like the picture.

place another band over the band you just placed except don't twist it this time. Do this to both sides.

Now using your hook, take it and pull the bottom bands over the top bands. (there should be two layers)

Keep placing bands on the pegs. Repeat the following step. Take your hook and keep pulling the bottom bands on top. It should start getting longer.

Now take a C-clip or S-clip and clip all 4 ends together. Then clip the other sides.

And you're bracelet is done!