Double X Rainbow Loom Bracelet

Loom Rainbow loom rubber bands Hook C-clip

Make the pegs into one big rectangle Also make sure the arrow is facing away from you than Place a rubber band from the middle to the left and then one from the middle to the right and push it down then place a rubber band from the far left and go to the second peg in the middle and then place another one from the far right and put it on the second one in the middle and repeat until you get to the top don't forget to push down

Once you have placed all of your bands it it time to stitch so flip the loom around and take your hook and start from the far left and hook it and take it to the middle and then go to the far right and take it to the middle then take the top middle one and take it to the left and take the second middle one and take it to the far right one

Now you can do the rest of the stitching go from the middle peg and take the first green ad i have it and bring it back upon its self then take the second green on that same peg and put it on its self then take the two side greens and bring them to the middle keep doing this same pattern until the end

Great now that you have gotten to the end you can do the extension so take the two ends and put them to the middle and then stick your hook through all of the top band and take it off and then take the c-clip and attach it to the bottom and then on the loom put about 5 rubber bands on normally and put the bracelet that does not have a c-clip and put it on the end of the looming stitch it normally and take it off and attach it to the c-clip and there you have it your welcome -aqua12